Introduction

This adaptor allows you to use an ATX power supply with an Amiga.
It does require you to use your existing power lead. Full instructions are provided.

The unit looks like this:

Design features
No modifications required to the ATX PSU.
Only 4 wires to install.
Connects to the power LEDs of the ATX case
Simple push on connection to the ATX power switch
Capable of powering a fully expanded PPC Amiga.
Provided with self adhesive feet to affix it to your case.
Pricing and order

Please goto the Sales page

An assembled unit is £8

If you are resident in the UK and want to pay by cheque, please contact me and I will supply my address for you to send the cheque to.
Support

 Installation manual (605K PDF file).
The schematics and PCB layout are available here (87 K zip file).

The adaptor has been tested with a number of ATX power supplies, all worked without issue. The only clarification I would make is relating to the on/off timing.
To turn on/off, depress the case switch, count to 1, then release. It is the release of the power switch that triggers the circuit, this is subtly different to the operation of a PC.

PCB power ratings
The tracking of the PCB can take the following currents safely:
+5V, 8 Amps.
+12V, 2.5 Amps.
-12V, 1.8 Amps

By Ian Stedman,  23 February 2010.

Updated 23 February 2010